Why your wireless mouse dies without warning
Short answer: Windows only shows a battery percentage for devices that report it through Bluetooth or a standard HID battery interface. Many 2.4 GHz mice report to their own receiver instead, so Windows has nothing to display — and the mouse simply stops.
It is rarely a faulty battery. The level is being measured; it is just not being shown anywhere you look. Once you know which path the mouse uses, the fix is straightforward.
Three reasons the warning never appears
- The receiver is invisible to Windows. A Logitech Bolt, Razer HyperSpeed or SteelSeries dongle answers vendor-specific queries. Windows sees a mouse, not a battery.
- Bluetooth reports late or coarsely. Some Bluetooth mice expose a level, but Windows may only refresh it on connect and round it to 10% steps.
- The vendor app is closed. The percentage lives in Logitech Options+, Razer Synapse or similar — and only while that app runs.
What to check in one minute
- Open Settings › Bluetooth & devices › Devices. If the mouse appears with a battery figure, Windows can see it.
- If it does not, open the vendor app once and check whether it shows a level. If it does, the data exists but is trapped in that app.
- Whichever path works, the goal is to keep that number visible without opening anything.
How to see it before it dies
BatteryHub reads the receiver or Bluetooth path directly and puts an icon and percentage next to the clock. At 15% the number turns red and a notification fires; you can set a per-device threshold from 5% to 40% if you want more notice. It also keeps a local 24-hour and 7-day history, so a battery that drains faster than usual is visible before it strands you.
The app is ~350 KB, uses about 2 MB of RAM, needs no account and only contacts GitHub to check for updates.