How to check your wireless mouse battery on Windows
Windows does not put a wireless mouse battery percentage anywhere obvious. Here is where the reading lives and how to keep it on screen.
Short answer: install BatteryHub, keep the device connected the way you use it, and read the icon and percentage next to the clock. No account, no vendor app.
Why the number is hard to find
Windows exposes a battery level only when the device implements a known profile. Bluetooth mice and headsets usually do, and they appear in Settings; a 2.4 GHz receiver often answers a vendor-specific HID query that Windows does not surface at all. Controllers sit somewhere in between: DualSense and DualShock 4 answer over USB and Bluetooth, while Xbox controllers depend on the connection and the battery type.
BatteryHub polls each supported device on its own protocol, then normalises the result into one taskbar icon and percentage. The reading refreshes every 60 seconds by default, immediately when a device is plugged in, and when the PC wakes from sleep.
What the taskbar shows
- Icon and percentage per device — a mouse, headset, keyboard or controller glyph with the level beside it.
- Red at 15% or less — plus a Windows notification, once, until the level recovers or charging starts.
- Blue bolt while charging, green tick when full — where the device reports a charging state.
- Dimmed text when asleep — the last known level, not an invented number.
Devices covered
Logitech MX Master 3S battery
Bolt usb receiver or bluetooth over usb-c, up to 70 days. Logitech Options+ is not needed. Through the Bolt receiver BatteryHub reads the HID++ battery feature directly, so the level is finer than the single figure Windows shows over Bluetooth.
Logitech G502 X Plus battery
Lightspeed usb receiver over usb-c, up to 120 hours without rgb. RGB lighting cuts the runtime sharply. Turning it off in G HUB is not required for BatteryHub, which reads the receiver directly.
Razer DeathAdder V3 Pro battery
Hyperspeed usb dongle or bluetooth over usb-c, up to 90 hours. Razer Synapse is not required. The dongle reports battery and charging state through Razer-feature reports, and the Bluetooth path uses the Windows battery level.
SteelSeries Aerox 3 Wireless battery
2.4 ghz dongle or bluetooth over usb-c, up to 80 hours. The Aerox 3 has a USB-C port recessed under a flap. When both the cable and the dongle answer, BatteryHub prefers the cable reading because it sees the charging state.
Glorious Model O Wireless battery
2.4 ghz usb dongle over usb-c, up to 71 hours. Model O, O-, D and D- Wireless share the same vendor feature report. Glorious Core is not needed; the dongle answers BatteryHub directly.
Pulsar X2 V3 battery
1k or 8k dongle, or usb-c cable over usb-c, up to 100 hours. The X2 V3 and X2 V3 eS use different dongles. Both are handled, and the reading includes charging state when the cable is connected.
FAQ
- Where does Windows show a wireless device battery?
- Only for devices that expose a battery through Bluetooth or a standard HID battery interface: Settings > Bluetooth & devices > Devices, and the taskbar tray for some of them. USB receivers usually report nothing to Windows, which is why a dedicated reader is needed.
- Do I need the vendor software to see the percentage?
- No. BatteryHub queries the device or its receiver directly for the devices on this page. Vendor apps are only needed for firmware updates or per-device remapping.
- Why is the percentage missing or stuck?
- A sleeping device shows its last known level dimmed, a device on a charging dock shows the bolt, and a receiver that was just replugged can take up to a minute to answer again. If the number never appears, the device may not report battery at all; BatteryHub's
--dumpoutput shows what it can see.