BatteryHub icon BatteryHub
Home › Battery levels › Pulsar › Pulsar X2 V3

Pulsar X2 V3 battery on Windows

Quick answer: BatteryHub shows the Pulsar X2 V3 level as an icon and a percentage next to the Windows clock. It reads the device over 1k or 8k dongle, or usb-c cable and updates every 60 seconds, with a red number at 15% or less and a bolt while charging.

Download BatteryHub 1.1.0 BatteryHub.v1.1.0.zip · 67 MB · Windows 10/11 64-bit

The Pulsar X2 V3 is a mouse that reports its battery through 1k or 8k dongle, or usb-c cable. Windows itself rarely shows that number anywhere useful: Bluetooth devices land in Settings, USB receivers usually show nothing at all, and the vendor app is a separate install. BatteryHub polls the device directly and draws the level on the taskbar.

How to check the Pulsar X2 V3 battery

  1. Download and run BatteryHub. The default install is per-user and needs no administrator rights.
  2. Connect the Pulsar X2 V3 the way you normally use it: 1k or 8k dongle, or usb-c cable.
  3. Look next to the clock. The device appears with its own icon and a percentage. Hover for the charging state and the last reading; click for the per-device menu.
  4. Open Battery history in that menu for a 24-hour, 7-day and 30-day chart, or set an alert threshold between 5% and 40% for this device.

What BatteryHub reports for this device

Connection1K or 8K dongle, or USB-C cable
ChargingUSB-C, up to 100 hours
Reportedpercentage and charging state
Also searched asPulsar X2 V3, X2 V3 eS battery, Pulsar mouse battery

What the reading means

Known quirks with the Pulsar X2 V3

The X2 V3 and X2 V3 eS use different dongles. Both are handled, and the reading includes charging state when the cable is connected.

FAQ

How do I check the Pulsar X2 V3 battery on Windows?
Install BatteryHub and connect the Pulsar X2 V3 over 1k or 8k dongle, or usb-c cable. The taskbar shows an icon and a percentage for it within a minute, and hovering gives the level, charging state and time since the last reading.
Does the Pulsar X2 V3 report battery over both its receiver and Bluetooth?
The Pulsar X2 V3 is read over 1k or 8k dongle, or usb-c cable. BatteryHub uses whichever link is active; if both answer, it prefers the connection that can also report the charging state.
Why does the Pulsar X2 V3 show as asleep or dimmed?
A dimmed reading means the device is asleep with its receiver still connected, so the last known level is shown rather than a fresh one. Wake the device or click it in the menu to refresh.

Get the level on your taskbar: Download BatteryHub 1.1.0

Free and open source. No account, no telemetry, ~350 KB, about 2 MB of RAM.