How to check your wireless headset battery on Windows
Most wireless headsets show only a red LED when the battery is low. These headsets report a real percentage to Windows — here is how to read it.
Short answer: install BatteryHub, keep the device connected the way you use it, and read the icon and percentage next to the clock. No account, no vendor app.
Why the number is hard to find
Windows exposes a battery level only when the device implements a known profile. Bluetooth mice and headsets usually do, and they appear in Settings; a 2.4 GHz receiver often answers a vendor-specific HID query that Windows does not surface at all. Controllers sit somewhere in between: DualSense and DualShock 4 answer over USB and Bluetooth, while Xbox controllers depend on the connection and the battery type.
BatteryHub polls each supported device on its own protocol, then normalises the result into one taskbar icon and percentage. The reading refreshes every 60 seconds by default, immediately when a device is plugged in, and when the PC wakes from sleep.
What the taskbar shows
- Icon and percentage per device — a mouse, headset, keyboard or controller glyph with the level beside it.
- Red at 15% or less — plus a Windows notification, once, until the level recovers or charging starts.
- Blue bolt while charging, green tick when full — where the device reports a charging state.
- Dimmed text when asleep — the last known level, not an invented number.
Devices covered
SteelSeries Arctis Nova Pro Wireless battery
Base station with 2.4 ghz over swap batteries, charged in the base station. The base station keeps two batteries charged and has its own OLED menu. BatteryHub reads the headset through the station, so you get the level in the taskbar without looking at the dock.
Logitech G733 battery
Lightspeed usb receiver over usb-c, up to 29 hours. The G733 has no Bluetooth, so the Lightspeed receiver must be plugged in. BatteryHub reads the headset through the receiver rather than through G HUB.
HyperX Cloud Alpha Wireless battery
2.4 ghz usb receiver over usb-c, up to 300 hours. The 300-hour claim is real but depends on volume. BatteryHub reads the headset directly, so the taskbar shows the actual level rather than a three-bar guess.
Corsair HS80 Max battery
Slipstream receiver or bluetooth over usb-c, up to 65 hours. The HS80 Max added Bluetooth and longer runtime over the original HS80. Both paths are read; iCUE is optional and not needed for the battery level.
Razer BlackShark V2 Pro battery
2.4 ghz usb receiver over usb-c, up to 70 hours. The 2020 and 2023 BlackShark V2 Pro use different vendor reports. Both are handled; Razer Synapse does not need to be installed or running.
Audeze Maxwell battery
Usb dongle or usb-c cable over usb-c, up to 80 hours. Maxwell and Maxwell 2 use a single read-only battery query. The dongle and the cable are both supported, and the level is exposed without Audeze HQ.
FAQ
- Where does Windows show a wireless device battery?
- Only for devices that expose a battery through Bluetooth or a standard HID battery interface: Settings > Bluetooth & devices > Devices, and the taskbar tray for some of them. USB receivers usually report nothing to Windows, which is why a dedicated reader is needed.
- Do I need the vendor software to see the percentage?
- No. BatteryHub queries the device or its receiver directly for the devices on this page. Vendor apps are only needed for firmware updates or per-device remapping.
- Why is the percentage missing or stuck?
- A sleeping device shows its last known level dimmed, a device on a charging dock shows the bolt, and a receiver that was just replugged can take up to a minute to answer again. If the number never appears, the device may not report battery at all; BatteryHub's
--dumpoutput shows what it can see.