BatteryHub icon BatteryHub
Home › Battery levels › HyperX › HyperX Cloud Alpha Wireless

HyperX Cloud Alpha Wireless battery on Windows

Quick answer: BatteryHub shows the HyperX Cloud Alpha Wireless level as an icon and a percentage next to the Windows clock. It reads the device over 2.4 ghz usb receiver and updates every 60 seconds, with a red number at 15% or less and a bolt while charging.

Download BatteryHub 1.1.0 BatteryHub.v1.1.0.zip · 67 MB · Windows 10/11 64-bit

The HyperX Cloud Alpha Wireless is a headset that reports its battery through 2.4 ghz usb receiver. Windows itself rarely shows that number anywhere useful: Bluetooth devices land in Settings, USB receivers usually show nothing at all, and the vendor app is a separate install. BatteryHub polls the device directly and draws the level on the taskbar.

How to check the HyperX Cloud Alpha Wireless battery

  1. Download and run BatteryHub. The default install is per-user and needs no administrator rights.
  2. Connect the HyperX Cloud Alpha Wireless the way you normally use it: 2.4 ghz usb receiver.
  3. Look next to the clock. The device appears with its own icon and a percentage. Hover for the charging state and the last reading; click for the per-device menu.
  4. Open Battery history in that menu for a 24-hour, 7-day and 30-day chart, or set an alert threshold between 5% and 40% for this device.

What BatteryHub reports for this device

Connection2.4 GHz USB receiver
ChargingUSB-C, up to 300 hours
Reportedpercentage and charging state
Also searched asCloud Alpha Wireless, Cloud Alpha battery, HyperX headset battery

What the reading means

Known quirks with the HyperX Cloud Alpha Wireless

The 300-hour claim is real but depends on volume. BatteryHub reads the headset directly, so the taskbar shows the actual level rather than a three-bar guess.

FAQ

How do I check the HyperX Cloud Alpha Wireless battery on Windows?
Install BatteryHub and connect the HyperX Cloud Alpha Wireless over 2.4 ghz usb receiver. The taskbar shows an icon and a percentage for it within a minute, and hovering gives the level, charging state and time since the last reading.
Does the HyperX Cloud Alpha Wireless report battery over both its receiver and Bluetooth?
The HyperX Cloud Alpha Wireless is read over 2.4 ghz usb receiver. BatteryHub uses whichever link is active; if both answer, it prefers the connection that can also report the charging state.
Why does the HyperX Cloud Alpha Wireless show as asleep or dimmed?
A dimmed reading means the device is asleep with its receiver still connected, so the last known level is shown rather than a fresh one. Wake the device or click it in the menu to refresh.

Get the level on your taskbar: Download BatteryHub 1.1.0

Free and open source. No account, no telemetry, ~350 KB, about 2 MB of RAM.