HyperX Pulsefire Haste 2 Wireless battery on Windows
Quick answer: BatteryHub shows the HyperX Pulsefire Haste 2 Wireless level as an icon and a percentage next to the Windows clock. It reads the device over 2.4 ghz usb dongle and updates every 60 seconds, with a red number at 15% or less and a bolt while charging.
The HyperX Pulsefire Haste 2 Wireless is a mouse that reports its battery through 2.4 ghz usb dongle. Windows itself rarely shows that number anywhere useful: Bluetooth devices land in Settings, USB receivers usually show nothing at all, and the vendor app is a separate install. BatteryHub polls the device directly and draws the level on the taskbar.
How to check the HyperX Pulsefire Haste 2 Wireless battery
- Download and run BatteryHub. The default install is per-user and needs no administrator rights.
- Connect the HyperX Pulsefire Haste 2 Wireless the way you normally use it: 2.4 ghz usb dongle.
- Look next to the clock. The device appears with its own icon and a percentage. Hover for the charging state and the last reading; click for the per-device menu.
- Open Battery history in that menu for a 24-hour, 7-day and 30-day chart, or set an alert threshold between 5% and 40% for this device.
What BatteryHub reports for this device
| Connection | 2.4 GHz USB dongle |
|---|---|
| Charging | USB-C, up to 100 hours |
| Reported | percentage and charging state |
| Also searched as | Pulsefire Haste 2 Wireless, Haste 2 battery, HyperX mouse battery |
What the reading means
- White number — the last fresh reading. Levels refresh every 60 seconds by default, and immediately when the device is plugged in or the PC wakes.
- Red number — 15% or less. The same threshold triggers the low-battery notification unless you set a per-device value.
- Blue bolt — charging. A green tick replaces it once the device is full and still on power.
- Dimmed text — the device is asleep and the number is the last known level, not a new sample.
Known quirks with the HyperX Pulsefire Haste 2 Wireless
The Haste 2 family uses a vendor HID report rather than a Windows battery interface. Both the 2.4 GHz dongle ID and the newer variant are handled.
FAQ
- How do I check the HyperX Pulsefire Haste 2 Wireless battery on Windows?
- Install BatteryHub and connect the HyperX Pulsefire Haste 2 Wireless over 2.4 ghz usb dongle. The taskbar shows an icon and a percentage for it within a minute, and hovering gives the level, charging state and time since the last reading.
- Does the HyperX Pulsefire Haste 2 Wireless report battery over both its receiver and Bluetooth?
- The HyperX Pulsefire Haste 2 Wireless is read over 2.4 ghz usb dongle. BatteryHub uses whichever link is active; if both answer, it prefers the connection that can also report the charging state.
- Why does the HyperX Pulsefire Haste 2 Wireless show as asleep or dimmed?
- A dimmed reading means the device is asleep with its receiver still connected, so the last known level is shown rather than a fresh one. Wake the device or click it in the menu to refresh.
Get the level on your taskbar: Download BatteryHub 1.1.0
Related battery pages
- HyperX Cloud Alpha Wireless — headset battery
- HyperX Cloud Flight — headset battery
- HyperX Cloud III Wireless — headset battery
- Logitech MX Master 3S — mouse battery
- All supported devices
- How to check a wireless mouse battery on Windows