BatteryHub icon BatteryHub
Home › Battery levels › Logitech › Logitech G733

Logitech G733 battery on Windows

Quick answer: BatteryHub shows the Logitech G733 level as an icon and a percentage next to the Windows clock. It reads the device over lightspeed usb receiver and updates every 60 seconds, with a red number at 15% or less and a bolt while charging.

Download BatteryHub 1.1.0 BatteryHub.v1.1.0.zip · 67 MB · Windows 10/11 64-bit

The Logitech G733 is a headset that reports its battery through lightspeed usb receiver. Windows itself rarely shows that number anywhere useful: Bluetooth devices land in Settings, USB receivers usually show nothing at all, and the vendor app is a separate install. BatteryHub polls the device directly and draws the level on the taskbar.

How to check the Logitech G733 battery

  1. Download and run BatteryHub. The default install is per-user and needs no administrator rights.
  2. Connect the Logitech G733 the way you normally use it: lightspeed usb receiver.
  3. Look next to the clock. The device appears with its own icon and a percentage. Hover for the charging state and the last reading; click for the per-device menu.
  4. Open Battery history in that menu for a 24-hour, 7-day and 30-day chart, or set an alert threshold between 5% and 40% for this device.

What BatteryHub reports for this device

ConnectionLightspeed USB receiver
ChargingUSB-C, up to 29 hours
Reportedpercentage and charging state
Also searched asG733, G733 Lightspeed, Logitech G733 battery

What the reading means

Known quirks with the Logitech G733

The G733 has no Bluetooth, so the Lightspeed receiver must be plugged in. BatteryHub reads the headset through the receiver rather than through G HUB.

FAQ

How do I check the Logitech G733 battery on Windows?
Install BatteryHub and connect the Logitech G733 over lightspeed usb receiver. The taskbar shows an icon and a percentage for it within a minute, and hovering gives the level, charging state and time since the last reading.
Does the Logitech G733 report battery over both its receiver and Bluetooth?
The Logitech G733 is read over lightspeed usb receiver. BatteryHub uses whichever link is active; if both answer, it prefers the connection that can also report the charging state.
Why does the Logitech G733 show as asleep or dimmed?
A dimmed reading means the device is asleep with its receiver still connected, so the last known level is shown rather than a fresh one. Wake the device or click it in the menu to refresh.

Get the level on your taskbar: Download BatteryHub 1.1.0

Free and open source. No account, no telemetry, ~350 KB, about 2 MB of RAM.

Related battery pages