BatteryHub icon BatteryHub
Home › Battery levels › Audeze › Audeze Maxwell

Audeze Maxwell battery on Windows

Quick answer: BatteryHub shows the Audeze Maxwell level as an icon and a percentage next to the Windows clock. It reads the device over usb dongle or usb-c cable and updates every 60 seconds, with a red number at 15% or less and a bolt while charging.

Download BatteryHub 1.1.0 BatteryHub.v1.1.0.zip · 67 MB · Windows 10/11 64-bit

The Audeze Maxwell is a headset that reports its battery through usb dongle or usb-c cable. Windows itself rarely shows that number anywhere useful: Bluetooth devices land in Settings, USB receivers usually show nothing at all, and the vendor app is a separate install. BatteryHub polls the device directly and draws the level on the taskbar.

How to check the Audeze Maxwell battery

  1. Download and run BatteryHub. The default install is per-user and needs no administrator rights.
  2. Connect the Audeze Maxwell the way you normally use it: usb dongle or usb-c cable.
  3. Look next to the clock. The device appears with its own icon and a percentage. Hover for the charging state and the last reading; click for the per-device menu.
  4. Open Battery history in that menu for a 24-hour, 7-day and 30-day chart, or set an alert threshold between 5% and 40% for this device.

What BatteryHub reports for this device

ConnectionUSB dongle or USB-C cable
ChargingUSB-C, up to 80 hours
Reportedpercentage and charging state
Also searched asAudeze Maxwell, Maxwell 2 battery, Audeze headset battery

What the reading means

Known quirks with the Audeze Maxwell

Maxwell and Maxwell 2 use a single read-only battery query. The dongle and the cable are both supported, and the level is exposed without Audeze HQ.

FAQ

How do I check the Audeze Maxwell battery on Windows?
Install BatteryHub and connect the Audeze Maxwell over usb dongle or usb-c cable. The taskbar shows an icon and a percentage for it within a minute, and hovering gives the level, charging state and time since the last reading.
Does the Audeze Maxwell report battery over both its receiver and Bluetooth?
The Audeze Maxwell is read over usb dongle or usb-c cable. BatteryHub uses whichever link is active; if both answer, it prefers the connection that can also report the charging state.
Why does the Audeze Maxwell show as asleep or dimmed?
A dimmed reading means the device is asleep with its receiver still connected, so the last known level is shown rather than a fresh one. Wake the device or click it in the menu to refresh.

Get the level on your taskbar: Download BatteryHub 1.1.0

Free and open source. No account, no telemetry, ~350 KB, about 2 MB of RAM.

Related battery pages