BatteryHub icon BatteryHub
Home › Battery levels › ASTRO › ASTRO A50 X

ASTRO A50 X battery on Windows

Quick answer: BatteryHub shows the ASTRO A50 X level as an icon and a percentage next to the Windows clock. It reads the device over a50 x base station over usb and updates every 60 seconds, with a red number at 15% or less and a bolt while charging.

Download BatteryHub 1.1.0 BatteryHub.v1.1.0.zip · 67 MB · Windows 10/11 64-bit

The ASTRO A50 X is a headset that reports its battery through a50 x base station over usb. Windows itself rarely shows that number anywhere useful: Bluetooth devices land in Settings, USB receivers usually show nothing at all, and the vendor app is a separate install. BatteryHub polls the device directly and draws the level on the taskbar.

How to check the ASTRO A50 X battery

  1. Download and run BatteryHub. The default install is per-user and needs no administrator rights.
  2. Connect the ASTRO A50 X the way you normally use it: a50 x base station over usb.
  3. Look next to the clock. The device appears with its own icon and a percentage. Hover for the charging state and the last reading; click for the per-device menu.
  4. Open Battery history in that menu for a 24-hour, 7-day and 30-day chart, or set an alert threshold between 5% and 40% for this device.

What BatteryHub reports for this device

ConnectionA50 X base station over USB
ChargingDock charging
Reportedpercentage and docked status
Also searched asA50 X, ASTRO A50 battery, A50 Gen 5 battery

What the reading means

Known quirks with the ASTRO A50 X

The A50 X base station handles HDMI switching and charging. BatteryHub reports the headset percentage and whether it is docked, so you can see a low pack before a session.

FAQ

How do I check the ASTRO A50 X battery on Windows?
Install BatteryHub and connect the ASTRO A50 X over a50 x base station over usb. The taskbar shows an icon and a percentage for it within a minute, and hovering gives the level, charging state and time since the last reading.
Does the ASTRO A50 X report battery over both its receiver and Bluetooth?
The ASTRO A50 X is read over a50 x base station over usb. BatteryHub uses whichever link is active; if both answer, it prefers the connection that can also report the charging state.
Why does the ASTRO A50 X show as asleep or dimmed?
A dimmed reading means the device is asleep with its receiver still connected, so the last known level is shown rather than a fresh one. Wake the device or click it in the menu to refresh.

Get the level on your taskbar: Download BatteryHub 1.1.0

Free and open source. No account, no telemetry, ~350 KB, about 2 MB of RAM.

Related battery pages