Razer Basilisk V3 Pro battery on Windows
Quick answer: BatteryHub shows the Razer Basilisk V3 Pro level as an icon and a percentage next to the Windows clock. It reads the device over hyperspeed dongle or bluetooth and updates every 60 seconds, with a red number at 15% or less and a bolt while charging.
The Razer Basilisk V3 Pro is a mouse that reports its battery through hyperspeed dongle or bluetooth. Windows itself rarely shows that number anywhere useful: Bluetooth devices land in Settings, USB receivers usually show nothing at all, and the vendor app is a separate install. BatteryHub polls the device directly and draws the level on the taskbar.
How to check the Razer Basilisk V3 Pro battery
- Download and run BatteryHub. The default install is per-user and needs no administrator rights.
- Connect the Razer Basilisk V3 Pro the way you normally use it: hyperspeed dongle or bluetooth.
- Look next to the clock. The device appears with its own icon and a percentage. Hover for the charging state and the last reading; click for the per-device menu.
- Open Battery history in that menu for a 24-hour, 7-day and 30-day chart, or set an alert threshold between 5% and 40% for this device.
What BatteryHub reports for this device
| Connection | HyperSpeed dongle or Bluetooth |
|---|---|
| Charging | USB-C, up to 90 hours without RGB |
| Reported | percentage and charging state |
| Also searched as | Basilisk V3 Pro, Basilisk V3 battery, Razer Basilisk |
What the reading means
- White number — the last fresh reading. Levels refresh every 60 seconds by default, and immediately when the device is plugged in or the PC wakes.
- Red number — 15% or less. The same threshold triggers the low-battery notification unless you set a per-device value.
- Blue bolt — charging. A green tick replaces it once the device is full and still on power.
- Dimmed text — the device is asleep and the number is the last known level, not a new sample.
Known quirks with the Razer Basilisk V3 Pro
The Basilisk V3 Pro has a wireless charging puck option. Dock charging shows as charging in BatteryHub, and the level stops dropping while it sits on the dock.
FAQ
- How do I check the Razer Basilisk V3 Pro battery on Windows?
- Install BatteryHub and connect the Razer Basilisk V3 Pro over hyperspeed dongle or bluetooth. The taskbar shows an icon and a percentage for it within a minute, and hovering gives the level, charging state and time since the last reading.
- Does the Razer Basilisk V3 Pro report battery over both its receiver and Bluetooth?
- The Razer Basilisk V3 Pro is read over hyperspeed dongle or bluetooth. BatteryHub uses whichever link is active; if both answer, it prefers the connection that can also report the charging state.
- Why does the Razer Basilisk V3 Pro show as asleep or dimmed?
- A dimmed reading means the device is asleep with its receiver still connected, so the last known level is shown rather than a fresh one. Wake the device or click it in the menu to refresh.
Get the level on your taskbar: Download BatteryHub 1.1.0
Related battery pages
- Razer DeathAdder V3 Pro — mouse battery
- Razer Viper V3 Pro — mouse battery
- Razer BlackShark V2 Pro — headset battery
- Razer Barracuda X — headset battery
- All supported devices
- How to check a wireless mouse battery on Windows