Keychron M4 battery on Windows
Quick answer: BatteryHub shows the Keychron M4 level as an icon and a percentage next to the Windows clock. It reads the device over 2.4 ghz receiver or usb-c cable and updates every 60 seconds, with a red number at 15% or less and a bolt while charging.
The Keychron M4 is a mouse that reports its battery through 2.4 ghz receiver or usb-c cable. Windows itself rarely shows that number anywhere useful: Bluetooth devices land in Settings, USB receivers usually show nothing at all, and the vendor app is a separate install. BatteryHub polls the device directly and draws the level on the taskbar.
How to check the Keychron M4 battery
- Download and run BatteryHub. The default install is per-user and needs no administrator rights.
- Connect the Keychron M4 the way you normally use it: 2.4 ghz receiver or usb-c cable.
- Look next to the clock. The device appears with its own icon and a percentage. Hover for the charging state and the last reading; click for the per-device menu.
- Open Battery history in that menu for a 24-hour, 7-day and 30-day chart, or set an alert threshold between 5% and 40% for this device.
What BatteryHub reports for this device
| Connection | 2.4 GHz receiver or USB-C cable |
|---|---|
| Charging | USB-C, up to 90 hours |
| Reported | percentage and charging state |
| Also searched as | Keychron M4, M4 4K battery, Keychron mouse battery |
What the reading means
- White number — the last fresh reading. Levels refresh every 60 seconds by default, and immediately when the device is plugged in or the PC wakes.
- Red number — 15% or less. The same threshold triggers the low-battery notification unless you set a per-device value.
- Blue bolt — charging. A green tick replaces it once the device is full and still on power.
- Dimmed text — the device is asleep and the number is the last known level, not a new sample.
Known quirks with the Keychron M4
The M4 4K uses the Keychron 4K Link receiver. BatteryHub asks the receiver which mouse is linked, then reads the level from the mouse report.
FAQ
- How do I check the Keychron M4 battery on Windows?
- Install BatteryHub and connect the Keychron M4 over 2.4 ghz receiver or usb-c cable. The taskbar shows an icon and a percentage for it within a minute, and hovering gives the level, charging state and time since the last reading.
- Does the Keychron M4 report battery over both its receiver and Bluetooth?
- The Keychron M4 is read over 2.4 ghz receiver or usb-c cable. BatteryHub uses whichever link is active; if both answer, it prefers the connection that can also report the charging state.
- Why does the Keychron M4 show as asleep or dimmed?
- A dimmed reading means the device is asleep with its receiver still connected, so the last known level is shown rather than a fresh one. Wake the device or click it in the menu to refresh.
Get the level on your taskbar: Download BatteryHub 1.1.0
Related battery pages
- Keychron K5 Max — keyboard battery
- Logitech MX Master 3S — mouse battery
- Logitech MX Master 3 — mouse battery
- Logitech G502 X Plus — mouse battery
- All supported devices
- How to check a wireless mouse battery on Windows