BatteryHub icon BatteryHub
Home › Battery levels › Finalmouse › Finalmouse UltralightX

Finalmouse UltralightX battery on Windows

Quick answer: BatteryHub shows the Finalmouse UltralightX level as an icon and a percentage next to the Windows clock. It reads the device over 2.4 ghz dongle only (not the charging cable) and updates every 60 seconds, with a red number at 15% or less and a bolt while charging.

Download BatteryHub 1.1.0 BatteryHub.v1.1.0.zip · 67 MB · Windows 10/11 64-bit

The Finalmouse UltralightX is a mouse that reports its battery through 2.4 ghz dongle only (not the charging cable). Windows itself rarely shows that number anywhere useful: Bluetooth devices land in Settings, USB receivers usually show nothing at all, and the vendor app is a separate install. BatteryHub polls the device directly and draws the level on the taskbar.

How to check the Finalmouse UltralightX battery

  1. Download and run BatteryHub. The default install is per-user and needs no administrator rights.
  2. Connect the Finalmouse UltralightX the way you normally use it: 2.4 ghz dongle only (not the charging cable).
  3. Look next to the clock. The device appears with its own icon and a percentage. Hover for the charging state and the last reading; click for the per-device menu.
  4. Open Battery history in that menu for a 24-hour, 7-day and 30-day chart, or set an alert threshold between 5% and 40% for this device.

What BatteryHub reports for this device

Connection2.4 GHz dongle only (not the charging cable)
ChargingUSB-C, about 60 hours
Reportedpercentage and charging state
Also searched asUltralightX, Finalmouse battery, Starlight battery

What the reading means

Known quirks with the Finalmouse UltralightX

The UltralightX reports battery through its dongle, not through its own USB cable. If BatteryHub shows nothing while the mouse is plugged in, switch to the dongle or Bluetooth is not an option on this model.

FAQ

How do I check the Finalmouse UltralightX battery on Windows?
Install BatteryHub and connect the Finalmouse UltralightX over 2.4 ghz dongle only (not the charging cable). The taskbar shows an icon and a percentage for it within a minute, and hovering gives the level, charging state and time since the last reading.
Does the Finalmouse UltralightX report battery over both its receiver and Bluetooth?
The Finalmouse UltralightX is read over 2.4 ghz dongle only (not the charging cable). BatteryHub uses whichever link is active; if both answer, it prefers the connection that can also report the charging state.
Why does the Finalmouse UltralightX show as asleep or dimmed?
A dimmed reading means the device is asleep with its receiver still connected, so the last known level is shown rather than a fresh one. Wake the device or click it in the menu to refresh.

Get the level on your taskbar: Download BatteryHub 1.1.0

Free and open source. No account, no telemetry, ~350 KB, about 2 MB of RAM.