BatteryHub icon BatteryHub
Home › Battery levels › Corsair › Corsair Scimitar Elite SE Wireless

Corsair Scimitar Elite SE Wireless battery on Windows

Quick answer: BatteryHub shows the Corsair Scimitar Elite SE Wireless level as an icon and a percentage next to the Windows clock. It reads the device over slipstream receiver and updates every 60 seconds, with a red number at 15% or less and a bolt while charging.

Download BatteryHub 1.1.0 BatteryHub.v1.1.0.zip · 67 MB · Windows 10/11 64-bit

The Corsair Scimitar Elite SE Wireless is a mouse that reports its battery through slipstream receiver. Windows itself rarely shows that number anywhere useful: Bluetooth devices land in Settings, USB receivers usually show nothing at all, and the vendor app is a separate install. BatteryHub polls the device directly and draws the level on the taskbar.

How to check the Corsair Scimitar Elite SE Wireless battery

  1. Download and run BatteryHub. The default install is per-user and needs no administrator rights.
  2. Connect the Corsair Scimitar Elite SE Wireless the way you normally use it: slipstream receiver.
  3. Look next to the clock. The device appears with its own icon and a percentage. Hover for the charging state and the last reading; click for the per-device menu.
  4. Open Battery history in that menu for a 24-hour, 7-day and 30-day chart, or set an alert threshold between 5% and 40% for this device.

What BatteryHub reports for this device

ConnectionSlipstream receiver
ChargingUSB-C, up to 120 hours
Reportedpercentage and charging state
Also searched asScimitar Elite SE Wireless, Scimitar battery, MMO mouse battery

What the reading means

Known quirks with the Corsair Scimitar Elite SE Wireless

The 12-button side panel does not change the battery query. The newer Slipstream receiver ID is supported alongside the older one.

FAQ

How do I check the Corsair Scimitar Elite SE Wireless battery on Windows?
Install BatteryHub and connect the Corsair Scimitar Elite SE Wireless over slipstream receiver. The taskbar shows an icon and a percentage for it within a minute, and hovering gives the level, charging state and time since the last reading.
Does the Corsair Scimitar Elite SE Wireless report battery over both its receiver and Bluetooth?
The Corsair Scimitar Elite SE Wireless is read over slipstream receiver. BatteryHub uses whichever link is active; if both answer, it prefers the connection that can also report the charging state.
Why does the Corsair Scimitar Elite SE Wireless show as asleep or dimmed?
A dimmed reading means the device is asleep with its receiver still connected, so the last known level is shown rather than a fresh one. Wake the device or click it in the menu to refresh.

Get the level on your taskbar: Download BatteryHub 1.1.0

Free and open source. No account, no telemetry, ~350 KB, about 2 MB of RAM.