How to check your wireless keyboard battery on Windows
Wireless keyboards hide the battery in a key combo, a vendor app or the Bluetooth panel. This is what works, per keyboard family.
Short answer: install BatteryHub, keep the device connected the way you use it, and read the icon and percentage next to the clock. No account, no vendor app.
Why the number is hard to find
Windows exposes a battery level only when the device implements a known profile. Bluetooth mice and headsets usually do, and they appear in Settings; a 2.4 GHz receiver often answers a vendor-specific HID query that Windows does not surface at all. Controllers sit somewhere in between: DualSense and DualShock 4 answer over USB and Bluetooth, while Xbox controllers depend on the connection and the battery type.
BatteryHub polls each supported device on its own protocol, then normalises the result into one taskbar icon and percentage. The reading refreshes every 60 seconds by default, immediately when a device is plugged in, and when the PC wakes from sleep.
What the taskbar shows
- Icon and percentage per device — a mouse, headset, keyboard or controller glyph with the level beside it.
- Red at 15% or less — plus a Windows notification, once, until the level recovers or charging starts.
- Blue bolt while charging, green tick when full — where the device reports a charging state.
- Dimmed text when asleep — the last known level, not an invented number.
Devices covered
Logitech MX Keys battery
Bolt or unifying receiver, or bluetooth over usb-c, up to 10 days with backlight. Backlight brightness dominates the runtime. The keyboard reports a charging flag, so the blue bolt on the taskbar tells you when the cable is connected.
Logitech G915 battery
Lightspeed usb receiver over micro-usb, up to 30 hours with rgb. The G915 uses micro-USB and has a dedicated battery key. BatteryHub shows the same percentage in the taskbar, without Logitech G HUB running.
Keychron K5 Max battery
Bluetooth, or the link receiver with patched firmware over usb-c, up to 90 hours. A stock K5 Max only reports battery over Bluetooth. With the project firmware patch it also reports over the 2.4 GHz receiver, which is what BatteryHub reads on that path.
NuPhy WH80 battery
Usb cable or bluetooth over usb-c, up to 100 hours. Over USB the WH80 answers a read-only NuPhyIO battery query; over Bluetooth it is read as a Windows keyboard battery. Both appear the same way on the taskbar.
FAQ
- Where does Windows show a wireless device battery?
- Only for devices that expose a battery through Bluetooth or a standard HID battery interface: Settings > Bluetooth & devices > Devices, and the taskbar tray for some of them. USB receivers usually report nothing to Windows, which is why a dedicated reader is needed.
- Do I need the vendor software to see the percentage?
- No. BatteryHub queries the device or its receiver directly for the devices on this page. Vendor apps are only needed for firmware updates or per-device remapping.
- Why is the percentage missing or stuck?
- A sleeping device shows its last known level dimmed, a device on a charging dock shows the bolt, and a receiver that was just replugged can take up to a minute to answer again. If the number never appears, the device may not report battery at all; BatteryHub's
--dumpoutput shows what it can see.