BatteryHub icon BatteryHub
Home › Battery levels › Guides

Why Windows shows no battery percentage for your Bluetooth device

Some Bluetooth devices show a percentage in Windows Settings and others do not. The difference is the profile, not the Windows version.

Short answer: install BatteryHub, keep the device connected the way you use it, and read the icon and percentage next to the clock. No account, no vendor app.

Download BatteryHub 1.1.0 67 MB · Windows 10/11 64-bit

Why the number is hard to find

Windows exposes a battery level only when the device implements a known profile. Bluetooth mice and headsets usually do, and they appear in Settings; a 2.4 GHz receiver often answers a vendor-specific HID query that Windows does not surface at all. Controllers sit somewhere in between: DualSense and DualShock 4 answer over USB and Bluetooth, while Xbox controllers depend on the connection and the battery type.

BatteryHub polls each supported device on its own protocol, then normalises the result into one taskbar icon and percentage. The reading refreshes every 60 seconds by default, immediately when a device is plugged in, and when the PC wakes from sleep.

What the taskbar shows

Devices covered

Samsung Galaxy Buds2 Pro battery

Bluetooth over case charging, about 5 hours per charge. Windows exposes Galaxy Buds as a Bluetooth device with a battery level, so they appear like any other device. BatteryHub shows what Windows reports and adds history and a low-battery alert.

Logitech MX Master 3S battery

Bolt usb receiver or bluetooth over usb-c, up to 70 days. Logitech Options+ is not needed. Through the Bolt receiver BatteryHub reads the HID++ battery feature directly, so the level is finer than the single figure Windows shows over Bluetooth.

Xbox Wireless Controller battery

Bluetooth, or the xbox wireless adapter over aa batteries or rechargeable pack. Battery reporting depends on the connection: Bluetooth exposes the level, while the older Xbox Wireless Adapter path is less consistent. AA cells have no charging state, so the bolt only appears with a play-and-charge pack.

PlayStation 5 DualSense battery

Usb-c cable or bluetooth over usb-c, about 12 hours. BatteryHub reads the DualSense over USB and Bluetooth, including the charging state while it charges from the PC. Steam is not required, and the reading appears next to the clock.

FAQ

Where does Windows show a wireless device battery?
Only for devices that expose a battery through Bluetooth or a standard HID battery interface: Settings > Bluetooth & devices > Devices, and the taskbar tray for some of them. USB receivers usually report nothing to Windows, which is why a dedicated reader is needed.
Do I need the vendor software to see the percentage?
No. BatteryHub queries the device or its receiver directly for the devices on this page. Vendor apps are only needed for firmware updates or per-device remapping.
Why is the percentage missing or stuck?
A sleeping device shows its last known level dimmed, a device on a charging dock shows the bolt, and a receiver that was just replugged can take up to a minute to answer again. If the number never appears, the device may not report battery at all; BatteryHub's --dump output shows what it can see.